XERUN XD10 Pro Black (Stealth) ESC

Transform your 1/10 scale drift chassis into a precision sideways scalpel with the ultra-smooth Hobbywing Xerun XD10 Pro ESC.

When you're holding massive drift angle inches from the wall, throttle feel is everything. The Hobbywing Xerun XD10 Pro is engineered specifically for the demanding world of 1/10 scale RC drift racing. Featuring a massive 100A continuous and 800A burst current rating, this Stealth Edition (Black) controller delivers surgically precise throttle and brake inputs without breaking a sweat. Hobbywing optimized the 32-bit M4 processor exclusively for drift applications, allowing you to fine-tune ultra-high drive (48K) and brake (24K) frequencies for unparalleled drivability on polished concrete or P-tile surfaces.

The XD10 Pro doesn’t just perform flawlessly; it looks the part. The sleek, low-CG aluminum case is paired with an integrated aluminum cooling fan to keep temps down during those high-rpm tandem runs. It boasts an adjustable 5A/10A switch-mode BEC that easily powers the most demanding high-voltage drift servos and gyros without experiencing brown-outs. Plus, with reverse polarity protection built into the board, a simple battery slip-up won’t fry your high-end electronics. Whether you are a casual slider or a competition veteran, the XD10 Pro gives you the ultimate competitive edge.

Why You'll Love It

• Drift-Optimized Firmware: Powered by a 32-bit M4 processor, the custom drift parameters (including initial start-up force and ultra-high frequency tuning) give you absolute control over wheel spin and deceleration.
• Reverse Polarity Protection: We've all plugged a battery in backwards during a chaotic pit stop. The integrated protection circuit ensures your ESC survives the mistake (note: the external standard capacitor will still be damaged and need replacing).
• High-Voltage BEC: The built-in switch-mode BEC adjusts from 5.0V to 7.4V in 0.1V increments, delivering up to 10A of peak current to keep your power-hungry drift servos and gyros lightning-fast and responsive.
• Ultra-Soft 13AWG Wiring: Pre-soldered with low-resistance, highly flexible silicone wire that makes clean, aesthetically pleasing cable management a breeze in tight drift chassis layouts.

What's Under the Hood

• Current Rating: 100A Continuous / 800A Peak
• Input Voltage: 2S LiPo / 4-6S NiMH
• BEC Output: Switch-mode 5.0V-7.4V adjustable (5A Continuous / 10A Peak)
• Motor Limit: Sensored Brushless Motors ≥8.5T (on 2S LiPo)

Specifications

• Scale/Application: 1/10 Scale Drift
• Length: 40.7 mm
• Width: 35.0 mm
• Height: 32.0 mm (with fan)
• Weight: 95g (including wires)

What's In The Box

• Hobbywing Xerun XD10 Pro Brushless ESC (Stealth Black)
• Aluminum Cooling Fan (Factory Installed)
• Pre-Soldered 13AWG Input and Output Wires
• External Capacitor Pack
• Mounting Tape, Heat Shrink, and Zip Ties

Note: Requires a compatible 1/10 scale sensored brushless motor, 2S LiPo battery, and soldering for your specific battery connector (sold separately). Pro-Tip: To get the absolute most out of this ESC, pair it with the Hobbywing OTA Bluetooth Programmer. Having the ability to wirelessly adjust your boost, turbo timing, and drag brake curves from your phone on the driver's stand is an absolute game-changer for tuning to different track surfaces.