MRT mPTX Personal Transponder - MRT-MPTX

A direct-powered personal transponder that reads on AMB and pre-4.5 MYLAPS RC4 timing systems, for a lot less than an RC4.

Check your track first: the mPTX works with AMBrc2, AMBrc3, MYLAPS RC3 and MYLAPS RC4 decoders running firmware before version 4.5. Ask your race director which firmware the track's decoder runs before you buy.

Why You'll Like It

• Direct powered: plugs into your receiver with a standard RC 3-pin plug, so it is on whenever the car is on.
• Five ID numbers: one main ID plus 4 alternative IDs.
• Waterproof and fuel-proof case: fine for nitro and wet tracks.
• Mount it your way: use the 3-hole tabs, or remove the tabs for a direct fit.

Specifications

• Case: 19 x 16 x 6 mm
• Weight: approx. 3 g
• Operating voltage: 2.1V - 16V DC (reverse polarity protected)
• Power draw: approx. 8mA at 6V DC
• Lead: RC 3-pin standard plug, red/black, approx. 190 mm
• Signal: magnetic induction
• Temperature range: 32 - 122 deg F (0 - 50 deg C)
• Status LED: blue