Kyosho MP9 & MP10 Rear Sway Bar 2.6mm - KYOIF460-26

Regular price $4.99
By Kyosho
SKU: IF460-26

Dial in your rear roll stiffness and keep your buggy flat through fast sweepers with the Kyosho 2.6mm Rear Stabilizer Sway Bar.

Sway bar thickness is one of the cleanest ways to tune how an 1/8 scale buggy transfers weight in corners without touching shock oil or spring rates. Built for the Kyosho MP9 and MP10 platforms, this 2.6mm rear bar firms up the back end under lateral load so the chassis stays composed through high speed sweepers and quick chicanes.

Stepping up to a 2.6mm bar helps limit excessive rear chassis roll on higher grip tracks, sharpening corner entry rotation and keeping the inside rear tire working with the suspension instead of fighting body lean.

Why You'll Love It

  • 2.6mm Tuning Diameter: Increases rear roll stiffness to sharpen rotation and stabilize the chassis on grooved dirt or high grip surfaces.
  • Direct MP9 and MP10 Fitment: Shaped specifically for Kyosho MP9 and MP10 rear suspension geometry with no guesswork at the track.
  • Consistent Wire Temper: Genuine Kyosho spring steel delivers repeatable flex characteristics from qualifying rounds through the main.

Specifications

  • Part Number: KYOIF460-26
  • Position: Rear
  • Diameter: 2.6mm
  • Compatibility: Kyosho MP9 and MP10

Pro-Tip: After installing a heavier sway bar, disconnect the shock bottoms and verify that both rear arms droop evenly and the bar pivots smoothly in the bulkhead mounts with zero bind.